Flownbeauty ad: 50% OFF

I've done hair for twelve years, and these are the tools I'd never recommend to a client with a bob. Not because they're bad — because of what a bob actually needs. A bob is three things at once: lift at the crown, the nape kept tight, and the ends tucked under instead of flicking out. Miss the lift and it goes flat and heavy. Miss the nape and it bulks out and drags your whole profile down. That's the "frumpy" look — and it's almost never the cut. The thing that gets all three is a proper blowout: round brush in one hand, dryer in the other, twenty minutes, and a skill I went to school for. Every tool on the market is trying to replace that blowout — and nearly every one smooths the hair and forgets the lift. The curling wand burns your nape and drops all the movement to your ends. The $500 straightener presses your crown flat — the one place a bob can't be flat. The multi-styler gives you that rounded "helmet" my clients call mumsy. The blow-dry brush is the closest to what I do, but the barrel's wider than the section, so it pushes volume out at the sides. The triangle. The one I actually recommend is the **Flown GoBrush Pro**. Three different bristle depths — the outer tips get in under the root and lift it while the heated base smooths the strand, in the same pass. Lift and smooth at once. That *is* the blowout, in one cordless tool, in one motion. Crown up, nape tight, ends tucked — you decide, in about five minutes. If you've got a bob you've never once been able to make look the way it did leaving the salon chair — it was never the cut. It was the tool. 👉 GoBrush Pro is 50% off right now, with a free leather travel pouch. Try it 30 days — if it's not for you, send it back and you won't pay a thing.